Joey Shipley, Panasonic PT-AE900U owners since May 2006 says…
"Just wanted to share with everyone how much ProjectorPeople helped me out. I didn
Recently a friend of mine mentioned that he needed an additional television set for gaming. He was looking for a 32-inch set to sit next to his larger projection TV. Naturally he asked me for advice, since I think about this stuff all the time. But in reality, I haven’t seriously shopped for a conventional CRT TV in a few years. As it turned out, a WVGA projector seemed to be his most cost efficient option. Here’s why:
Shopping for a Conventional TV
With the push towards flat screen technology, I figured he could get a 32-inch conventional TV for about a buck and a half, but this did not turn out to be the case. During a quick search of popular consumer electronics websites, I found a few TVs that I could actually recommend based on inputs, quality, and overall features. They ranged in price from $449 – $650. Each of these products were standard 4:3, and 480i resolution.
[ Photo: Movie displayed on WVGA Hitachi ED-PJ32 projector from progressive scan DVD player. ]
By comparison, the WVGA projector (Hitachi ED-PJ32) is native 480p resolution (or enhanced definition), which is generally considered superior to 480i (or standard definition). The projector also had component video inputs which were not available on all the CRT options, and of course, the projector can produce an image larger than 32-inches. It also weighs just 4.8 lbs. and has a footprint about the size of a large book so it can be easily put away when not in use. The portability element was cool for him as well, since it allows him to take his projector to friends’ houses for another night of gaming or watching movies.
WVGA Video Projector vs. Conventional TV
Quick Tip: One potential drawback is the shorter life of the light mechanism (lamp) in the projector. However if it is used 8 hours or less a week, and is properly maintained (allowed to cool during shut down and filters kept clean) the current lamp should last up to five years. Lamp warranties are also available for $99 which allows for two lamp replacements in five years.
A portable or manual screen would be a great addition to his set up, but was not required as he as able to project onto the wall. He is contemplating making his own screen with material from a fabric store.
What’s a WVGA Projector Good For?
A WVGA projector will do a bang-up job of displaying movies from a progressive scan (480p) DVD player. A screen size up to 92-inches will give you the best looking images. Larger than 92-inches will not look as good, but if you aren’t particular, filling the entire garage door with an image is very impressive. When calibrated correctly with a software tool like AVIA, the WVGA projector will look better than a CRT television which, of course, cannot produce images as large as 92-inches.
[ Photo: Madden for Xbox displayed on WVGA Hitachi ED-PJ32 projector from progressive scan DVD player. ]
If This is You, Consider a WVGA Projector:
When is a WVGA Not a Good Choice?
If you are planning on upgrading to high-definition in the near future, then a WVGA projector will not be a good choice for you. While a WVGA projector should be able to scale high resolution images, the quality will not match what a native high-definition display can do. With the prices as reasonable as they are today, it’s hard to think of another reason not to buy one.
Featured projector Hitachi ED-PJ32 »
In our hustle and hurry world, not everybody has time to wait for a projector to ‘cool-down’ after use. New faster shut-down times make it possible to simply unplug a projector and go. It’s a feature that’s been on presenter wishlists for some time, and now its time has come.
Business presenters are often under tight schedules, giving several presentations in different locations in a single days time. Teachers who share classrooms might have to accommodate tight classroom schedules. Business conference rooms might also be tightly booked for several meetings in a day, but each meeting may not require use of the projector, which may mean turning the projector off quickly to accommodate the next group.
Chances are many presenters were not allowing their projectors sufficient cool down times even before this new technology emerged. This might have occurred because presenters lacked the time or patience to wait, or due to frequent power outages during presentations. The unfortunate result would be shorter lamp life, which wouldn’t become apparent until the projector had been used for several months. So instead of seeing a 1000 hour lamp life, as the manufacturer specified, the lamp might start to dim significantly after just 400 or 500 hours.
Whoever the presenter may be, this new technology is a big plus for the schools and businesses that own the equipment. IT/AV managers can sleep just a little easier knowing that their projector investments will experience less wear and tear.
The technology varies from manufacturer to manufacturer, but the answer seems to lie in two ingenuities. One, better heat dissipation in the product designs. Second, small capacitors inside projectors that run the fan for an additional amount of time after the projector is shut-off.
The product design improvements include better cooling and filtering systems that keep the projector cooler when in use, and components that handle heat more efficiently overall. Projectors like the Mitsubishi XD430U even include filter-free construction, making them resistant to dust, dirt, and other particles and meaning maintenance free operation as well.
Both methods have been tested and proven to save lamp life, and to protect the components inside that make the projector operate.
In addition to faster shut down times, many manufacturers have also added faster start-up times to their bag of tricks. Instead of waiting 30 seconds for your projector to warm up, projectors with quick-start up can be presentation ready in as little as 3-5 seconds.
Have questions about which new products include faster shut-down times? Ask a Projector Expert today!